Webinar: Sincpac

Date: September 26, 2017
Time: 11:30 am – 12:30 pm
Location: Your Desk

Are you one of those Civil 3D users that love the tool, but sometimes you wish it just had a few more features to make your life easier? Sincpac extends and enhances the built-in Civil 3D functionality, adding over 150 new commands that add power versatility and time-saving features to your project process. If you thought Civil 3D was powerful before, just wait until you turbocharge it with Sincpac.

Key Takeaways

  • Overview of top Civil 3D features that Sincpac enhances
  • How Sincpac will speed up your design and editing in Civil 3D

 REGISTER NOW

Webinar Wednesdays

Bluebeam and Beer: Perform Takeoffs Faster

Date: September 26, 2017
Time: 4:30 – 7:00 pm
Location: Vintage Brewing Co
674 South Whitney Way
Madison, WI 53711

In this industry, bids are required to win jobs. Lots of time is spent preparing them, and many of them are rejected. How many more jobs could you win if you had a faster and more accurate way to get bids out the door? Mitigate your risk by having accurate data in your bids.

Join us to learn how you can prepare you next bid as much as 70% faster using Revu. We’ll showcase how professional estimators:

  • Expedite the takeoff process from PDF plan sets using Revu’s built-in measurement tools
  • Export the information to Excel
  • Create full estimates directly within Revu

 REGISTER NOW

Webinar: Dynamo

Date: October 3, 2017
Time: 11:30 am – 12:30 pm
Location: Your Desk

Dynamo Studio is a stand-alone programming environment that enables designers to create visual logic to explore parametric conceptual designs, automate repetitive tasks and make more informed decisions about energy, space, etc.

Key Takeaways

  • Explore more design options faster using simple data, logic, and analysis
  • Automate repetitive tasks to speed the design process and improve efficiency
  • Visualize complex geometric problems with graphical logic to drive the behavior of your design model
  • Extend your designs into interoperable workflows for documentation, fabrication, coordination, simulation, and analysis

 REGISTER NOW

Wisconsin Manufacturing & Technology Show

Date: October 3-5, 2017
Location: Wisconsin State Fair Park Exposition Center
8200 W Greenfield Ave, West Allis, WI 53214
Booth #1251

The place for education, collaboration, and innovation. The Wisconsin Manufacturing & Technology Show (WIMTS) is Wisconsin’s largest manufacturing event, with nearly 5,000 in attendance at the last show. This year it’s back with more of everything—100,000 square feet of exhibit space full of displays, demonstrations, products, and services. Experience the latest technologies, find new suppliers and see machines up and running. Interact with industry leaders and discover new processes to solve your manufacturing challenges. Join us to help shape the technology of tomorrow, while benefiting your bottom line.

 LEARN MORE

Bluebeam and Beer: Perform Takeoffs Faster

Date: October 4, 2017
Time: 4:30 – 7:00 pm
Location: Good City Brewing
2108 N Farwell Ave
Milwaukee, WI 53202

In this industry, bids are required to win jobs. Lots of time is spent preparing them, and many of them are rejected. How many more jobs could you win if you had a faster and more accurate way to get bids out the door? Mitigate your risk by having accurate data in your bids.

Join us to learn how you can prepare you next bid as much as 70% faster using Revu. We’ll showcase how professional estimators:

  • Expedite the takeoff process from PDF plan sets using Revu’s built-in measurement tools
  • Export the information to Excel
  • Create full estimates directly within Revu

 REGISTER NOW

Webinar: Civil 3D Sheet Sets

Date: October 10, 2017
Time: 11:30 am – 12:30 pm
Location: Your Desk

Would it be nice to create, manage, share and plot your entire set of design drawing sheets from on convenient location? What if you could also set those sheets up with all the necessary title block info from that same location? Manage project sheet drawings, and the list goes on and on.

Key Takeaways

  • We will demonstarte what the sheet set manager can do when properly set up
  • Managing layouts (sheets) within sheet set manager
  • Populating title blocks with intelligent attribute data

 REGISTER NOW

 

Autodesk Webinar: Move to Subscription – Your Path to Industry Collections

Date: October 10, 2017
Time: 1:00 – 1:45 pm
Location: Your Desk

Industry collections give you access to a wide selection of Autodesk software and services in one simple package. As Autodesk continues to move toward a subscription business model, we want to make sure you’re informed of your options.

Subscribing to Autodesk products is the most flexible and cost-effective way to access and manage your design, engineering, and software tools.

By switching to subscription, you will have:

  • The option to move to our new industry collections at a discounted price
  • New and improved support
  • Simplified administration

Join us as Shawnita Sterett, Sr. Marketing Director at Autodesk, walks through the Path to Industry Collections and responds to your questions in a live Q&A session.

 REGISTER NOW

AEC Collection: The Right Tool for the Job!

Date: October 10, 2017
Time: 4:30 – 6:30 pm
Location: Green Bay Distillery
835 Mike McCarthy Way
Ashwaubenon, WI 54304

The Autodesk AEC Collection represents a powerful toolbox for building, civil infrastructure, and construction projects.  Join us October 10 as we will demonstrate how your land development project can benefit from using this toolbox instead of a single traditional design or drafting solution alone.  These benefits include:

  • differentiating your business
  • diversifying your services
  • reducing re-work, and more!

For this land development scenario, we will show several examples of applying the tools within the AEC Collection to the various project stages such as: concept planning, preliminary design, project approval, final design, and value add.

Presented by: Jerry Bartels, LEED Green Associate & Sr. Technical Specialist for Infrastructure – Autodesk

 REGISTER NOW

Bluebeam and Beer: Perform Takeoffs Faster

Date: October 10, 2017
Time: 4:30 – 7:00 pm
Location: Westwood Tavern and Tap
1385 N. Meacham Rd.
Schaumburg, IL 60173

In this industry, bids are required to win jobs. Lots of time is spent preparing them, and many of them are rejected. How many more jobs could you win if you had a faster and more accurate way to get bids out the door? Mitigate your risk by having accurate data in your bids.

Join us to learn how you can prepare you next bid as much as 70% faster using Revu. We’ll showcase how professional estimators:

  • Expedite the takeoff process from PDF plan sets using Revu’s built-in measurement tools
  • Export the information to Excel
  • Create full estimates directly within Revu

 REGISTER NOW

 

AEC Collection: The Right Tool for the Job!

Date: October 11, 2017
Time: 4:30 – 6:30 pm
Location: Next Door Brewing Company
2439 Atwood Ave
Madison, WI 53704

The Autodesk AEC Collection represents a powerful toolbox for building, civil infrastructure, and construction projects.  Join us October 11 as we will demonstrate how your land development project can benefit from using this toolbox instead of a single traditional design or drafting solution alone.  These benefits include:

  • differentiating your business
  • diversifying your services
  • reducing re-work, and more!

For this land development scenario, we will show several examples of applying the tools within the AEC Collection to the various project stages such as: concept planning, preliminary design, project approval, final design, and value add.

Presented by: Jerry Bartels, LEED Green Associate & Sr. Technical Specialist for Infrastructure – Autodesk

 REGISTER NOW

AEC Collection: The Right Tool for the Job!

Date: October 12, 2017
Time: 4:30 – 6:30 pm
Location: Prairie Street Brewhouse
200 Prairie Street
Rockford, IL 61107

The Autodesk AEC Collection represents a powerful toolbox for building, civil infrastructure, and construction projects.  Join us October 12 as we will demonstrate how your land development project can benefit from using this toolbox instead of a single traditional design or drafting solution alone.  These benefits include:

  • differentiating your business
  • diversifying your services
  • reducing re-work, and more!

For this land development scenario, we will show several examples of applying the tools within the AEC Collection to the various project stages such as: concept planning, preliminary design, project approval, final design, and value add.

Presented by: Jerry Bartels, LEED Green Associate & Sr. Technical Specialist for Infrastructure – Autodesk

 REGISTER NOW

Design 2 Part – Indianapolis

Date: October 11-12, 2017
Location: Indiana Convention Center
100 S Capitol Ave, Indianapolis, IN 46225
Booth #505

See The Best Manufacturers Face-to-Face at the Region’s Largest Contract Manufacturing Trade Show!

You will…

  • Find quality suppliers
  • Discover new technologies
  • Solve manufacturing problems

 LEARN MORE

Webinar: Leica BLK360 with Infraworks/Recap Pro

Date: October 17, 2017
Time: 11:30 am – 12:30 pm
Location: Your Desk

This session will include an overview of the process to collect point cloud data with Leica’s BLK360 Scanner and Recap Pro. The data will then be brought into InfraWorks, and the capabilities of this product data will be demonstrated. Finally, we will highlight how to retrieve and register the data for consumption in other Autodesk products.

Key Takeaways

  • Overview of where the industry is headed and how to scan data is enabling new workflows and deliverables for your clients
  • Features and functions of Lecia’s amazingly affordable new BLK laser scanner
  • How to process and use scan data inside of InfraWorks and other Autodesk products

 REGISTER NOW

ACEC WI Civil 3D User Workshop

Date: October 18-19, 2017
Location: GLACIER CANYON LODGE at the Wilderness Resort
511 E Adams St, Wisconsin Dells, WI 53965

This event will give attendees extended networking opportunities and the chance to learn from experts in Civil 3D. This workshop is open to engineers, technicians, resellers, government officials and anyone else who uses Civil 3D. This workshop will also feature specific WisDOT instruction and guidelines.

 LEARN MORE

Webinar: Insight

Date: October 19, 2017
Time: 11:30 am – 12:30 pm
Location: Your Desk

Insight cloud service empowers architects and integrated design teams with centralized access to building performance analysis data and advanced simulation engines. With Insight, you can visualize and interact with key performance indicators, benchmarks, factors, ranges, and specifications to make better-informed design decisions.

Key Takeaways

  • Discover intuitive, outcome-driven insight into energy and environmental optimization, from design to operation.
  • Understand how Insight integrates with your BIM design process
  • See heating and cooling load simulations, daylighting and solar analysis, etc.

 REGISTER NOW

Manufacturing First Expo & Conference 

Date: October 25-26, 2017
Location: KI Convention Center
333 Main Street
Green Bay, WI 54301

Manufacturing First is presented by First Business alongside NEW Manufacturing Alliance and Insight Publications to provide Wisconsin manufacturers with hands-on opportunities to grow their businesses. It is designed for them to showcase industry advances, highlight successes, announce the latest developments, and provide premier networking opportunities.

 LEARN MORE

Design & Manufacturing Minneapolis

Date: November 8-9, 2017
Location: Minneapolis Convention Center
1301 2nd Ave S
Minneapolis, MN 55403
Booth #506

Back for its third year, Design & Manufacturing brings you the latest in CAD/CAM software, 3D printing, rapid prototyping, new materials, injection molding, and more. The show is part of the Midwest’s largest advanced design and manufacturing event, presenting a full spectrum of products and services supporting the region’s booming medical sector — and beyond. Join 5,500 professionals and more than 600 suppliers to experience tomorrow’s technologies at the region’s most comprehensive industry event.

 LEARN MORE

IMTS – International Manufacturing Technology Show

Date: September 10-15, 2018
Location: McCormick Place
2301 S Lake Shore Dr
Chicago, IL 60616

More than 115,000 industrial decision-makers, including many of your competitors, attend IMTS – The International Manufacturing Technology Show to get ideas and find answers to their manufacturing problems. They will see new technology demonstrated … and choose the best for their needs.

At IMTS they find ways to cut costs and get more work. They know that to survive and succeed, they must keep up with technology … and stay ahead of their competitors!

 LEARN MORE