Desktop Metal Studio System 2

Office-friendly metal 3D printing in just 2 steps - Print. Sinter.

Easy, two-step processing

Making complex, high-performance metal parts has never been easier. Featuring a breakthrough two-step process, next-generation Separable Supports, and a software-controlled workflow, the Studio System 2 makes it simpler than ever to produce custom metal parts.

Connect with a 3D Expert

Fill out the form below for an expert to connect with you. Or sign up for a meeting with an expert by clicking here.

High-quality parts

Easily produce difficult-to-machine parts featuring complex geometry like undercuts and internal channels. Fabricate, the software at the heart of the Studio System, automates complicated metallurgical processes to produce high-quality parts with densities and feature accuracy similar to casting.

Reliable Processing

The Studio System 2 leverages data and feedback from thousands of prints and hundreds of customers. Designed to deliver outstanding part success and excellent surface finish, the system allows users to achieve first-time part success across a wide range of geometries. This is made possible by a fully re-engineered material platform, updated interface technology and new print profiles.

Designed for the office

The Studio System 2 was designed from the ground up to fit into your team's workflow. With no solvents, no loose metal powders or lasers, and very little operator intervention required, the system makes it easy to start printing metal parts - no third-party equipment or special facilities required.

It features a two-step process that eliminates the need for solvents and uses materials that can be easily stored and handled, making it ideal for use in an office environment - no special facilities and no respiratory PPE needed. The only requirements are an internet connection, ventilation, and power, making it easy to quickly start printing metal parts.

Printer - Download Spec Sheet

Unlike laser-based systems that selectively melt metal powder, the Studio System extrudes bound metal rods-similar to how an FDM printer works. This eliminates many of the safety requirements often associated with metal 3D printing while enabling new features like the use of fully closed-cell infill for lightweight strength.

Furnace - Download Spec Sheet

Designed to be the easiest to use sintering furnace made, the Studio System 2 furnace first heats parts to remove all binders from parts, then ramps up the temperature to near-melting to deliver industrial-strength sintering in an office-friendly package. Built-in temperature profiles tuned to every build and material ensure uniform heating and cooling without the residual stresses introduced in laser-based systems.

Parts

Click part to see details

Impeller - 316L - This impeller is used to control the pressure and flow of fluids in equipment like pumps and compressors.

Size (mm)	82 x 82 x 28
Cost to print ($)	63.00
Cost to machine ($)	2138.00
Cost reduction	97.05%

APG Thread Checker Fixture - 17-4 PH - This fixture pushes a thread checker into a part on a manufacturing line.

Size (mm)	47 x 28 x15
Cost to print ($)	14.00

Pump_Housing_Front_Angle-1_STUDIO_480x480

Pump Housing - 17-4 PH - This is part of the housing for a hydraulic pump.

Size (mm)	136 x 131 x 47
Cost to print ($)	243.00
Cost to machine ($)	708.68
Savings vs. machining	65.68%

Studio System applications span a variety of industries including manufacturing, tooling, automotive, consumer, electronics, and oil & gas.